Delicious Burger & Onion Ring

This burger is actually on of my crafts that I have been planning to post for awhile. Actually had made it a few months ago back when I made some other burgers.

Anyways, here it is! First I colored the bun using chalk to give it more of a realistic look. To make the cheese I made a flat piece of clay then cut out a square shape with scissors. Next, I made the lettuce by using a tooth-pick to give it the lines and look of a real piece of lettuce. Then, I made the meat by using my fingers and a paintbrush with hardened dried paint on the brush. Instead of throwing out a paintbrush after use, I let the paint harden on the brush, then it became a great texture tool.

I made the plate out of clay by using a bottle top to shape it. The onion rings were made by getting a straight piece of clay, and making them into circles. I also used chalk and orange sand to give the onion rings a fried & breaded look. I mixed red and yellow puffy paint to make it look like ketchup and mustard.

Hope you like it!

National Dog Day Craft

Good morning crafters!

I`m so excited to post a new clay creation I created a few days ago! I was actually planning to post it for National Dog Day, but didn`t have time to finish the post.

Anyways, I created an adorable mini maroon fur colored puppy! It was pretty easy, the hardest part was her legs & face. It took a bit considering she`s smaller than my finger!

Hope you like it & Late Happy National Dog Day!

Candy Crush Jelly Saga Jelly Queen Figure

Hello crafters!

The amazing queen is here!

The Jelly Queen that is! Although she is a bit evil, we all know she has beat most of us a few times in the game Candy Crush Jelly Saga. So why wouldn`t we want a real life version of her?

What I used:
Blue, Purple, Pink, Yellow, and Green Pipe Cleaners
Pink, Blue, Black, Red, and Green Puffy Paint
Paper
Toothpicks

Tape
Empty Tape roll
Detergent Top
Duck Tape
Small foam ball

How I made it:

First, I started off making the body of the jelly queen, by using an empty tape roll and added a bunch of crunched up tape and covering the empty tape roll and top of it with sticky crunched up tape. Then, I covered it with curved horizontal pink pipe cleaners to make it circular and short vertical lines of pipe cleaners to give it more of a dress shape. I also used pipe cleaners to make the arms. Next, I painted the arms and dress with pink and a dash of red Puffy Paint mixed, now it`s time to work on her head! To start working on the jelly head, I used a yellow pipe cleaner to make Ms. Jelly Queen`s necklace. Next, I got a foam ball and pressed one part of it to give it the shape of her face. Then, I stuck purple pipe cleaners and stuck a few curved blue pipe cleaners into the top of the ball as her hair. Finally I painted her face with pink Puffy Paint, and parts of her hair with pink-ish purple-ish jelly colored Puffy Paint. I also painted her magical eyes. To start of the rest of it, I used pipe cleaners to create her candy stick. Then, since I was already creating her on a piece of paper, I added green Puffy Paint all around her. Once it was dry I cut it out. Finally, I covered a detergent top with purple duct tape as a stand for her. I glued the bottom of the Jelly Queen to the top of the detergent top/stand. The craft is finally finished!

i think she looks pretty good! I hope you like it!

Halloween And Fall Crafts - In Progress

Good morning crafty kitties!

I hope you all enjoyed the Solar Eclipse yesterday! It was really an amazing sight to see! 🌗🌘🌑🌒🌓🌔 I even think the Eclipse gave me a few thousand more ideas! I ended up working on another craft inspired by My Little Pony and the 2017 Solar Eclipse yesterday. Can`t wait to show you all, stay tuned, I will be posting it soon!

Now after awhile of talking, i`m super excited to show some new crafts I was working on!

A few days ago I started working on a few new Halloween and fall inspired crafts. As you might be able to see in the picture I was creating some Jack-O-Lantern candy buckets, a pumpkin a kitty in a pumpkin patch, some candy sticks and some bread covered in chocolate drizzle. My workspace was also a little messy that night since I was working on plenty projects at once.

I was also working on some candy corn, cat in a Jack-O-Lantern, and i`m still working on ice cream & cone charms, candy stand, and a few recycled plastic projects. Can`t wait to post everything soon!

Check back later! I figured out a new (and unusual) combination of things to make thick, stringy liquid air-dry clay and will be posting a tutorial on how to make it soon! 

Happy Eclipse

Here in U.S.A. it is a very exciting day! You might be wondering why today is so exciting. Well today an amazing Solar Eclipse is happening!

Of course anything exciting is very inspiring! So I just had to create a Solar Eclipse inspired miniature 1:12 scale cake. One half of the cake is dark blue (blueberry icing) with black tips (blackberry icing tips) to represent the moon, and a light yellow and orange color (peach icing) to represent the sun.

Just finished watching the awesome Eclipse!  Hope you like it and Happy Eclipse!

Candy Crush Soda Bubblegum Troll Inspired Figure

I`m super excited to show this fun craft I made awhile ago specially for a friend who also enjoys Candy Crush! The figure is inspired by the Bubblegum Troll that has been seen on Candy Crush Saga, and mostly Candy Crush Soda. It took awhile to create, but was tons of fun!

What I used:
- Pink Pipe cleaners
- Pink Puffy Paint
- White Puffy Paint
- Black Puffy Paint
- A top to a detergent container
- Duck Tape

How i created it:
it was pretty easy actually. I started off making the Bubblegum Troll by using pink pipe cleaners to make a cone like shape. Make sure the pipe cleaners are close enough together, if not then you`ll have to coat it with Puffy Paint many more times and will need a LOT more paint! Next, I added the arms using more pink pipe cleaners to make the shape of his arms. Then, I sprinkled a bunch of pink Puffy Paint on the arms and body. I used a paintbrush to spread the paint and used about 3 thick coats of Puffy Paint on it. After that, I had to of course give the evil little piece of bubblegum some eyes! I used white and black Puffy Paint for the eyes. I made two round ovals of white with Puffy Paint, then created two smaller black ovals. And finally, I got a top from a detergent container and used purple Duck tape to cover it. It is now a perfect stand for my bubblegum troll!

I think it turned out pretty good! Here are some pictures!

I hope you like it! Check back soon, I will be posting more Candy Crush inspired crafts soon!

Chocolate Heart Cake

A few nights ago I stayed up all night creating creating some new miniature cakes!

It took a few hours to finish all the cakes I started working on but I ended up finishing a pretty good amount of mini cakes!

Below i have a few pictures of one of my newest mini cakes! I have to admit it`s one of my favorites out of the cakes I made a few days ago. I used Puffy Paint and Calk for the chocolate icing and added some cute little chocolates as a topping on it.

Chocolate inside, chocolate icing and chocolate toppings. Sounds pretty delicious! *only edible for dolls!

I hope you like it!

Clay Books!

This seems just like the perfect craft to post with school starting again for everyone!

I actually created the books a few days before I created the Descendants inspired books, although they are similar, they`re a bit different!

How I made them:

 First, all I had to do was get an almost flat rectangle piece, put a thicker piece of white on top, then folded some and kept others open. Next, once 2 books looked like a closed book I used a needle tool to give the white part of the closed book a paper look. Then I used a toothpick to make it look like writing inside the open books. I decorated the inside of one book with small pieces of clay. After that, I made a little table for the books by making one small rectangle of brown clay, and two smaller rectangles about the length of length of the bigger rectangle from end A to end B, the height depends on how high you want the table to be. And finally, I then attached one smaller rectangle to end A to B of the table and the other smaller rectangle to end C to D.

Perfect books for any 1:12 scale doll! I hope you like it!

Chocolate High-heel

A few days ago I tried creating something. Not just anything though! It was an edible high-heel made out of chocolate!!! *edible for dolls only

It took awhile to create but was very much worth it!

How I made it:
It was actually easier than it looks. First, I made some beige clay into a thick triangle shape. Next, at end A of the triangle I used scissors to slightly cut into a little over half  of the height of the shoe. Then, I got a small strip of white clay and placed it into the triangle from end B to end C. After that, I just shape the shoe a little more with my hands. Finally, I decorated it with chocolate!

Perfect shoe to add to the display in my barbie boutique! I hope you like it!

Delicious Donuts!

With donuts being so delicious, I just had to make some miniature donuts! 

How I made them: 

First, I got some beige clay to represent a vanilla donut. Next, I got a small ball of beige clay and flattened it a little, but enough to keep it fluffy and thick. Then, I rolled out and flattened some brown, white and pink clay (to look like chocolate, strawberry and white icing). After that, I covered the tops of the donuts with a little of the flattened brown, pink and white clay. Finally, i used a toothpick to make the holes in the middle of the donuts.

I hope  you like them!

Cinnamon Rolls!

I`m so excited to introduce you to our newest food on the dessert  menu . . . 

Cinnamon Rolls!

I had a lot of fun creating these cute cinnamon rolls a few days ago! Wondering how I made them?

To start off, I got some light beige clay, and some brown Puffy Paint. (I used air-dry clay so i`m not sure if Puffy Paint would work well with polymer clay} Next, I rolled out the light beige clay and cut the clay in flat straight lines. Then, I added a little bit of brown Puffy Paint on each line of clay/fake dough. (the amount of clay and paint you need depends on the size cinnamon roll you want to make} Finally, I took one end of the clay with Puffy Paint with Puffy Paint on it and rolled it into a cinnamon roll!

For my first ever cinnamon rolls I think these turned out pretty good!

I hope you like them!

S'mores Prep Board

Ready to make some s'mores?

A few weeks ago I tried creating my first ever clay s'mores which turned out to be about 1:12 scale size. It was pretty fun & easy to make! While creating them I decided to make a s'mores prep board since any doll has to have a place and ingredients to make the s'mores

How I made it:
It was pretty easy. First, I got some light blue clay, sliced it into a rectangle and just shaped the edges a bit. I made the knife by just using gray clay and shaping it. Next, I got some leftover pink clay and shaped it into a bowl. Time for the ingredients! To make the marshmallows, I just got a small ball of white clay and shaped it a little to give it a fluffy marshmallow look & size. Then, I got some brown clay to use as the melted chocolate part. Finally, I created the graham cracker by cutting out a square of beige clay and then using a needle or toothpick to make 5 holes in it. Put the fake chocolate and marshmallows between two graham crackers and the miniature s'mores are finished!

Hope you like it!

Caramel Apple!

A few weeks ago I was working on trying to make a 1:6 scale caramel apple and a normal green apple, it turned out to be easier than it looks!

How I made them: 

First I started off by getting some green clay and rolling it into a ball. I used my fingers to give it more of a shape. Next I used a toothpick to make a small hole in the top of the apple. I used brown chalk to slightly give the hole some coloring. If you`re just making a normal green apple, then you`re finished!

Wanting to make a caramel apple? I did the exact same steps above. Then I cut the end of the toothpick to put in the hole of the apple as a small stick. Finally, I got some brown clay, rolled it out until it was pretty thin, and slightly covered the apple with the thin brown clay. The caramel apple is finished!

They turned out pretty good for my first ever try. I hope you like them!

Vanilla Icecream!

Good morning crafters!

A few days ago I tried creating some vanilla icecream! It took awhile to shape and texture but I think it looks pretty good! Planning to post a tutorial on it soon!

Hope you like it!

Tropical Coconut Drink

Today we`re here with a brand new tropical drink which is known as, our Tropical Coconut Drink!

It was super exciting and pretty easy to make! All I did was roll out a white ball of clay and covered it all of it except one side with brown clay. Then I shaped it a little and used a needle tool to give it some texture, I made the top of the little umbrella out of clay and used a toothpick for the stick part. I also used a pink painted toothpick for the straw part.

Although now that i`m thinking about it, we should have a tropical smoothe place if we`re going to create a coconut drink, shouldn`t we?

I hope you enjoy!

Unicorn Flavored Cotton Candy

Exactly as I mentioned in my last post, i`d be posting some new unicorn flavored cotton candy a few hours later and . . . . it`s a few hours later!

A few days ago while I was creating the pink cotton candy, I accidently mixed a little blue clay with it, and it turns out the colored mixed reminded me of a unicorn! So then unicorn cotton candy was created!

I hope you like it!

Pink Cotton Candy!

Our newest sweet treat added to the menu is officially cotton candy!

A few days ago I created some sweet & yummy pink (strawberry) cotton candy! It was pretty easy, I just created a oval shaped piece of pink clay, then used a paintbrush and foil to texture it.

It was really fun to make it. Here it is!

I hope you like it! Check back soon for some new unicorn inspired cotton candy that I will be posting today!

Descendants 2 Fish & Chips Shoppe

If you saw one of my recent posts you might`ve seen one of my projects i`m in the middle of working on is cat paw slippers, well this is my other project i`m working on!

After watching Disney`s Descendants 2 movie a few thousand times I started to really wish I had my own mini Ursula`s Fish & Chips Shoppe so i decided to make one!

Over the last few days i`ve been drawing signs and making decorations for it, hoping to be finished in about a week, although it takes awhile to draw the menus, and signs.

Can`t wait to finish it! I`ll be showing some more updates on it soon!

Cat Slippers In Pawgress

Lately i`ve been working on some new projects, and one of them are almost finished!

Over the past few days i`ve been working on . . . cat paws slippers!

So it is pretty easy to make, I just got a pair of slippers, found some pink craft felt and cut out the felt into circle-like shapes that would make it look like cat paws. I sewed the felt pieces onto the slipper and filled them with stuffing while sewing them on. You can see the first paw and first paw compared to unfinished paw below!

I`ve finished one paw so far, onto the second paw!

How To Make: Dollhouse Miniature Metal Pipes

A few months ago I created some miniature Barbie/1:6 scale metal pipes and decided it would be perfect to give a tutorial on how to make them! It is very easy and cheap to create!

Here`s what you will need:

- A paintbrush

- A straw (bigger size straw works better for 1:6 scale dolls, smaller size straw is better for 1;12 scale dolls)

- Silver Metallic Paint, I used Silver Metallic Puffy Paint, but pretty much any silver paint will work.

First, cut the straw into 3-5 pieces. Next, paint the straw pieces with the silver metallic paint & used the paintbrush to give it more texture. You can use a toothpick or tweezers to hold the pieces when painting if you don`t want to get too messy

Repaint the straw pieces as many times as needed to make it fully covered in metallic paint. Finally, let it dry. You now have miniature metal pipes for your dollhouse!
Here`s how mine turned out, it was pretty fun to make!

What do you think of them? Let us know in the comments!😀😀😀

Miniature Disney Descendants Clay Books

This project was super exciting to make & it was another project I was creating while leading up to the Disney Descendants 2 movie premiere.

Although i`m pretty new at creating books out of clay and paint, I tried creating 3 books each inspired to look like the 3 books in the Descendants novel book series, Isle of the Lost, Return to the Isle of the Lost, and Rise of the Isle of the Lost.

How I made the books:

It was pretty easy, all I had to do was get an almost flat rectangle piece, put a thicker piece of white on top, then fold it. Once it looked like a closed book I used paint and a few pieces of clay to color the book covers. When finished, you can also use a needle or a piece of paper to slightly put small lines of the 3 sides with white parts to make it look like a real closed book with pages inside!

The books actually are almost perfect for 1:12 scale dolls, but also work pretty fine for barbie/1:6 scale dolls

Here are my finished books inspired by the Disney Descendants books! 

I hope you like them! Going to be trying to make a video tutorial on how to create books using glue, paper and makers soon!